Brocks Performance Carbon Fiber Rear Frame Kit Monster models EVO User Manual
Brocks Performance For the car
Page 1 of 1
Brock’s Performance • 4064 E. Patterson Road • Dayton, OH 45430 • Phone: 937-912-0054 • Fax: 937-912-0062
DUCATI MONSTER CARBON FIBER REAR FRAME (#166097)
INSTALLATION INSTRUCTIONS
1.) Dismantle the stock aluminum frames by following the DUCATI workshop manual.
2.) The installation of the carbon frames will be in the reverse order.
3.) Due to the specific nature of the 3 feet long carbon composite half frame, the installer
ought to install the entire rear end frame perimeter (i.e. carbon frames and bolt on
ancillaries) but begin by leaving loose the nuts marked A, B, C, D, 13 and 14 and any
other nut and bolt, those like 9, 12.
4.) Next install the stock components to complete the frame rear end, items like 8, 15,
passenger foot peg brackets for the EVO and so forth.
5.) When all is squarely in place proceed with tightening the frame perimeter to DUCATI
workshop manual recommendation.
All Brock’s Performance products are designed for closed-course racetrack use ONLY!
For more information on Brock’s Performance Warranty and Terms and Conditions: www.BrocksPerformance.com
> About Us > Terms and Conditions
For Questions and Comments: www.BrocksPerformance.com > Customer Service > Contact Us
or call the Tech Line 937-912-0054