Edgecraft Chef's Choice 316 - Manual (Page 12)

12
ServICe
In the event post-warranty service is needed, return your sharpener to the EdgeCraft factory
where the cost of repair can be estimated before the repair is undertaken. Outside the USA,
contact your retailer or national distributor.
Please include your return address, daytime telephone number and a brief description of the
problem or damage on a separate sheet inside the box. Retain a shipping receipt as evidence of
shipment and as your protection against loss in shipment.
Assembled in the U.S.A. www.chefschoice.com
This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on
the product.
Chef’sChoice
® , EdgeCraft ® and the overall design of this product are registered trademarks of
EdgeCraft Corporation, Avondale, PA.
Conforms to UL Std. 982 Certified to CAN/CSA Std. C22.2 No.64
Certified to EN 60335-1, EN60335-2, EN55014-1+Ai, EN 61000-3-2, EN61000-3-3
© EdgeCraft Corporation 2011 Printed in China.
F11 C316605
EdgeCraft Corporation
825 Southwood Road
Avondale, PA 19311
Customer Service (800) 342-3255 or (610) 268-0500