Edgecraft ScissorPro 500 - Manual (Page 3)

CongratulatIonS
You are the owner of the world’s finest scissors sharpener designed to permit everyone to sharpen
scissors to professional standards, simply and easily. The ScissorPro
® will put an incredibly sharp
edge on your kitchen, household, sewing and arts and crafts scissors. It is important to completely
read this booklet to optimize your sharpening results.
ScissorPro
® owes much of its uniqueness to its precision magnetic guides, designed to hold the
scissors blade securely at a precise angle against the specially contoured, Omni-Curve ™ rotating
diamond abrasive disks. These guides (see Figures 1 and 2) incorporate a unique hold-down spring
mechanism and, in combination with the magnets, comprise the unique Magne-Flex
™ scissors hold-
down system. Before sharpening your first scissors it is important to read the following section:
3
Figure 2. Magnets control the blade angle
and keep scissors in contact with diamond
abrasive disk.
Omni-Curve ™
Diamond Disk
Magnet
Figure 3. Typical scissors.
Cutter
Edge
Anvil Edge
Back of Blade
Tip
Pivot
Top of Blade
Figure 1. ScissorPro ® Model 500.
Plastic Hold-Down Spring
Plastic Hold-Down Spring
On/Off Switch
“Fine” Stage
Diamond Abrasives
“Coarse” Stage
Diamond Abrasives
Magnet Surface
Magnet
Surface
Magne-Flex ™ Guides