Edsal MR841848 - Manual

Safety Instructions Safety Instructions Safety Instructions
These units should be placed on a level surface. Failure to do so can result in poor product performance or create a
possible safety hazard. This unit should be securely anchored to a wall or floor with suitable fasteners, which are not
included. Do not use this unit for anything other than the manufactures intended purpose. DO NOT STAND ON ANY
PART OF THE UNIT, OR USE IT AS A LADDER. Evenly distribute the weight on each level and always keep the
heavier loads on the bottom. Use care when working with metal parts.
Heavy Duty
Steel Shelving
MODEL NUMBER
MR - 841848
E - Woodboard Shelf
C - Top
Post 36”
MR MR MR - - - 841848 6 Shelf 841848 6 Shelf 841848 6 Shelf - - - 84”h x 18”d x 48”w 84”h x 18”d x 48”w 84”h x 18”d x 48”w
Description
A - Braces
B - Beams
C - Top Post
D - Bottom Post
E - Woodboard
Qty.
12
12
4
4
6
Part Number
RMBE1702
RMBE4703
RUPT3602S
RUPT4802S
RPB21848
Part Size
17 5/32”
47 5/32”
36”
48”
47 29/32”
General Instructions General Instructions General Instructions
Assembly is done with the rivets of the beams and braces fitting into the slots of the post. A rubber mallet may be used
on the beams and braces to seat the rivets properly. A hammer can also be used, providing one uses a cloth or a block
of wood between the hammer head and the parts to prevent damage. Tap gently and be sure the rivets are straight and
fully engaged.
Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel
free to contact our Muscle Rack manufacturing facility at, (773) 475-3000 and request customer service.
We can also be reached on the internet at the following email address : [email protected].
To obtain replacement parts, please provide the following information :
- Model # - Part # & Description - Location Purchased - Date Purchased
D - Bottom
Post 48”
A - Braces
B - Beams
Consumer Products Division
Edsal Manufacturing Company
4400 South Packers Avenue
Chicago, IL 60609
www.edsal.com