AKG Acoustics DMS700 - Manual (Page 23)

AUDIO Menu
GAIN
DSP
Important!
DSP Profiles -
Factory Default Settings
DSP Button
ATTENUATION PAD
9 Function Description
DMS
700
GAIN allows you to set the the input level to the DSP audio processing section.
The built-in digital signal processor with standard processing functions allows you to control your
audio signal directly from the receiver. The following dynamics processors are available:
• Low cut (frequency)
• 3-band Equalizer (low gain, mid gain, mid frequency, high gain)
• dbx ® Compressor (threshold, ratio, gain, attack and release times)
• dbx ® Limiter (threshold)
All settings can be stored together with a freely selectable name in one of nine DSP Profiles.
• Profile changes apply to both channels. All settings previously stored in a Profile will
be overwritten.
The DSP button provides a bypass function for LOW CUT, EQ, COMPRESSOR and LIMITER for each
channel separately.
Matches the receiver’s BALANCED output level to the input gain of the connected equipment . If you
are using a MIC input on your mixer, the 0 dB level might overload the input. In that case, set the re-
ceiver’s ATTENUATION PAD to -30 dB to reduce the output level.
The UNBALANCED line output level is not adjustable.
▲
!
LOW CUT EQ COMPRESSOR LIMITER
No. Profile Name Application
Freq.
[Hz]
Low Mid MidFreq High
dB] [dB] [kHz] [dB]
Thresh-
old
Ratio Gain Attack Release
[dB] [kHz] [ms] [ms]
Threshold
[dB]
1
Presenter
Handheld Present HT
Inexperienced
users,
PowerPoint,
places
of worship,
presenters
77 0 0 1.0 3.0 -30 2.1:1 3 1 71
0
2 Head-worn Present PT 40 OFF -25 1.5:1 5 6 207
3
Music
Handheld Music HT Experts,
vocalists,
rock bands,
Karaoke,
musical
40 OFF OFF 9
4 Head-worn Music PT
5
Instrument
Instrument
microphone
w/bodypack
Instru PT
Beginners and
experts,
trumpet,
tuba,
drums
El. guitar,
bass guitar, ac-
tive acoustic
guitar
OFF OFF OFF 9
6
Guitar
w/bodypack
Guitar PT
7 - 9 – User User 1 - 3 –
23
BDA_DMS 700_D030926_4China 12/09/2009 16:31 Seite 23 (Schwarz/Black Auszug)