Rugged Ridge Tail Light Euro Guards, Black, 07-14 Jeep Wrangler - Manual

2007 Jeep® JK Wrangler H/D Taillight Guards Kit
11226.02 (Black)
11103.03 (Stainless Steel)
Components:
(1) Driver’s side rear guard (1) Passenger’s side rear guard
(8) Black plastic taillight lens spacer (4) Small 2” Philips head screw
(4) Large 2” Philips head screw
Installation Instructions:
Step1: Select Driver’s or passenger side lens. Instructions will be the same.
Remove original screws (Fig.1). With the screws removed be careful
not to change the position of the taillight assemble. Note the size
difference of the two screws. The large size goes to the outside of the
lens (Fig.2).
Fig.1 Fig.2