Rugged Ridge Steering Component Skid Plate, 07-14 Jeep Wrangler (JK) - Manual

18003.30
Jeep
®
JK Wrangler Front Skid Plate
Contents:
1. Skid Plate Weldment (1)
2. Mounting Bracket (2)
3. M10 Washer (8)
4. M10 x 30 Hex Bolts (6)
5. M10 Lock Nuts (2)
6. M10 Nut Plate (2 - Not Shown)
1. Loosen Swaybar Mounts (4 bolts). On Non-Rubicon models these need to be loosened approximately
1/2". On Rubicon Models, the bolts will need to be removed and the swaybar allowed to drop away
from the frame.
2. Slide the Mounting Brackets in between the Swaybar Mounts and the Frame. On Rubicon Models,
position the Mounting Bracket in the proper place and lift the swaybar back into place, re-installing
original bolts but leaving them loose.
Page 1 of 2
1
4
3
2
5
Rev 2. 7/08/2010