Apple AirPort Networks - Manual (Page 36)

36 Chapter 3 AirPort Network Designs
5 Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
 If you chose “Share a public IP address” in the Network pane of AirPort Utility, select
“Obtain an IP address automatically.”
 If you chose “Distribute a range of IP addresses” when you set up the wireless device’s
network, you can provide Internet access to client computers by setting the client IP
addresses manually. Select “Use the following IP address.”
When you configure clients manually for a wireless device that provides NAT service,
use IP addresses in the range 10.0.1.2 to 10.0.1.200, 172.16.1.2 to 172.16.1.200, or
192.168.1.2 to 192.168.1.200.
In the “Subnet mask” field, enter 255.255.255.0. In the “Default gateway” field, enter
10.0.1.1, 172.16.1.1, or 192.168.1.1, depending on which addressing scheme you used. Enter
the same name server address and search domain information that you entered in the
wireless device configuration.