Rugged Ridge Evaporator Tank Skid Plate, 07-11 Jeep Wrangler (JK) User Manual
Jk vapor canister skid plate
1
2
3
4
5
6
Page 1 of 2
Contents:
1.
Skid Plate
(1)
2.
Rear Bracket
(1)
3.
Front Bracket
(1)
4.
Countersunk Bolt
(2)
5.
Hex Head Bolt
(2)
6.
Lock Washers
(2)
JK VAPOR CANISTER SKID PLATE
18003.40
1.
Start by disconnecting the electrical connector that attaches
to the rear of the vapor canister.
2.
Remove the 3 bolts securing the vapor canister to the frame
rails. 1 bolt is located at the rear of the canister and 2 are located at
the front. When these bolts are removed, the canister will be
suspended from the vehicle by hoses only so be sure not to let it
hang.
3.
Slide Rear Bracket over the rear of the vapor canister toward
the front of the vehicle being sure to keep the canister from hanging.
It might be easier to have a partner hold the canister while sliding on
the bracket.