Rugged Ridge Muffler Skid Plate, 07-14 Jeep Wrangler (JK) - Manual

18003.31
Jeep
®
JK Wrangler Muffler Skid Plate 07-11
Contents:
1. Skid Plate (1)
2. Mounting Bracket (1)
3. M12 Washer (3)
4. M12 x 30 Hex Bolts (3)
5. M10 x 30 Hex Bolts (2)
(not shown)
6. M10 x 30 Nut Plate (2)
(not shown)
7. M10 Flat Washer (2)
(not shown)
8. M10 (5mm) Spacer (2)
(not shown)
1. Remove the inner body mount nut on each side on the body mount above the rear axle. Loosen the
body mount bolt 2-3 turns.
2. Slide the Mounting Brackets in between the frame and the exhaust. The muffler hangers may have
to be removed to provide additional room. Position the mounting tabs of the Mounting Bracket onto
the inner studs of the body mount. Replace nuts removed in Step 1, but do not tighten.
Page 1 of 2
1
2
4
3
Rev. 2 (7/09/2010)