A&D A & D Digital Blood Pressure Monitor UA-767 Plus BT - Manual (Page 6)

English 4
Symbols
Symbols Function / Meaning Recommended Action
Standby and power on.
Battery installation guide
Direct current
SN
Serial number
Date of manufacture
Type BF: Device, cuff and tubing are
designed to provide special protection
against electrical shocks.
The indicator that appears while
measurement is in progress. It blinks
when the pulse is detected.
Measurement is in
progress. Remain as still
as possible.
Irregular Heartbeat indicator. (I.H.B.)
The indicator that appears when an
irregular heartbeat or any excessive
body movement is detected during
the measurement.
Previous measurements stored in
MEMORY.
Full Battery
The battery power indicator during the
measurement.
Low Battery
The indicator blinks when battery
power is low.
Replace all batteries with
new ones, when the
indicator blinks.
Unstable blood pressure due to
movement during the measurement.
Try the measurement
again. Remain very still
during the measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during inflation.
The cuff is not fastened correctly.
PUL. DISPLAY ERROR
The pulse is not detected correctly.
Fasten the cuff correctly,
and try the measurement
again.
SYS
Systolic blood pressure in mmHg
DIA
Diastolic blood pressure in mmHg.
PUL./min
Pulse per minute
EC directive medical device label
R&TTE directive transmitter module label
WEEE label