Rugged Ridge Euro Tail Light Guards, Titanium, 76-06 Jeep CJ & Wrangler - Manual

Installation Instructions
8660 (11226.01) Black and 11103.02 Stainless Steel
866009 (11301.01) Titanium
Euro Tail Light Guard 76-06 CJ/Wrangler
Step 1: Remove the four Phillips head
screws from the tail light lens.
Step 2: Remove the tail light lens cover.
Note: Use caution as the lens may
stick to the light housing.
Step 3: Remove the 3 tail light assembly
retaining bolts.
Step: 4 Remove the tail light housing from
from the body.
Step 5: Carefully pull the tail light wiring through the
hole. Guide the connector through the hole.
Step 6: Disconnect the tail light harness from the
main harness.
Page 1 of 2