Rugged Ridge 3-Inch Front Tube Bumper, Stainless Steel, 07-14 Jeep Wrangler (JK) - Manual

11561.10 - Texture Black
11563.10 - Stainless Steel
Jeep
®
JK Wrangler Tube Front Bumper
Contents:
1. Tube Bumper (1)
2. Right Bracket (1)
3. Push Fastener (4)
4. Left Bracket (1)
5. Cover Plate (1)
6. M3 Lock Nut (8)
7. M12 Washer (6)
8. M12 Lock Nut (8)
1. Disconnect fog lights. Remove 4 nuts per frame horn that hold the original front bumper to the vehicle.
Remove original bumper.
2. Install the original fog lights into the Center Section from the back (Figure 2a). Use the (8) M3 lock
nuts to secure them (Figure 2b).
Page 1 of 3
1
4
3
5
2 6 8
Figure 2b Figure 2a
7