Rugged Ridge Receiver Hitch for Rear Tube Bumpers, 87-06 Jeep Wrangler - Manual

Installation Instructions
Rear 2" receiver hitch
1987-2006 Wranglers
Parts List: (1) Rear Hitch
(8) 10mm Nuts
(4) 12mm Bolts
(4) 12 mm Lock Washers
(2) Rear mounting Brackets ( L & R )
(16) 10mm Flat Washers
(8) 12mm Flat Washers
(8) 10mm Bolts
(8) 10mm Lock Washers
Installation:
Step (1) Remove factory rear bumper and brackets. For the 97-2006 Wrangler the plastic side
guards will need to be removed.
For some 97-2006 Wranglers the rear body mount and bolt may need to be removed
to gain access to the top inside rear bumper bolt.
PG. 1