Rugged Ridge Rock Crawler Rear Bumper, Hitch & Tire Carrier, 87-06 Jeep Wrangler - Manual

P/N 11503.21 (Black)
Rock Crawler Classic Rear Bumper (With Tire Carrier)
For 87-06 Jeep® YJ & TJ Wrangler
Important notice:
Carefully read instructions before attempting to install this product. Rugged Ridge is in no way responsible
for any damage to the vehicle or personal injury that may occur during the installation or use of this
product.
NO DRILLING REQUIRED.
Supplied components (Box 1) Bumper:
Rear bumper p/n: 11503.20 (1) 3/8” x 1 ¼” Hex head bolts (8)
Backing plates (4) 3/8” Flat Washers (8)
3/8” Locking Washer (8) 7/16” x 1 ¼” Hex head bolt (2)
7/16” Flat Washer (2) 7/16” Lock Washer (2)
Supplied components (Box 2) Tire Carrier:
Tire Carrier (1) Post Bar (1)
Tire Mount Bracket (1) Circle Clip (1)
3/8”-24x1” Hex Head Bolt (3) 3/8”-24x1 ¼” Hex Head Bolt (2)
3/8” Flat Washer (10) 3/8” Nylock Nuts (5)
¾”x3” Hex Head Bolt (1) ¾” Flat Washer (2)
¾” Nylock Nut (1) ¼” -20 Lug Nuts (3)
Installation Instructions:
(Step 1): Remove factory rear bumper if equipped. For some TJ applications the rear body mount bolt and
bushing may be removed to ease installation. (Fig.1 and Fig.2)
Fig. 1 Fig.2
Pg.1