Rugged Ridge Hitch For Rear Tube Bumper, 55-86 Jeep CJ Models User Manual
Rugged Ridge For the car
Advertising
Installation Instructions
Rear 2" Receiver Hitch
55-86 Jeep CJ models
P/N: 11580.01
Hardware
(1) Rear Bumper
(8) 10mm Nuts
(4) 12mm Bolts
(4) 12 mm Lock Washers
(2) Rear mounting Brackets L-R
(16) 10mm Flat Washers
(8) 12mm Flat Washers
(8) 10mm Bolts
(8) 10mm Lock Washers
Installation:
WARNING: IT IS RECOMMENDED NOT TO EXCEED ANY TONGUE WEIGHT IN EXCESS OF 200LBS
Step (1)
Remove factory rear bumper or bumperettes and brackets if equipped.
The rear body mount and bolt can be removed to ease installation if needed.
Step (2)
Align inner and outer mounting holes with the rear frame cross member.
(2 outside of frame rail, and 2 inside frame rail for each side).
Use the 10mm bolt washer, and nut. Torque bolts to 50 ft-lbs.
Advertising