Rugged Ridge 3-Inch Tubular Bumper & Side Step Kit, Black, 87-06 Jeep Wrangler - Manual

Installation Instructions Front Tubular Bumper
Part Number 52403
55-06 Jeep CJ and Wrangler
Page 1 of 1
Parts List: (1) Front Tube Bumper
Important Note: To obtain the correct
installation, we recommend that you follow
these instructions
carefully. Please take care when installing
this.
Step 1: Remove the front
bumper from the vehicle. DO
NOT DISCARD THE
ORIGINAL HARDWARE, it will
be reused for the new bumper
during installation.
Step 2: Position the new
bumper up to the frame and line
up the holes to the factory
mounting locations. Using the
included and factory hardware,
secure the bumper to the
vehicle and tighten the bolts.