Rugged Ridge Triangular Storage Bag for Rugged Ridge Tire Carriers - Manual

Installation instructions ( p/n: 12801.50)
Rugged Ridge rear tire carrier recovery bag
For use with all A frame tire carriers - RRC and Classic rock crawler.
Parts included: (1) Recovery bag
Warning: Bag has been designed to mount flush
with inside of carrier. Spare tire adjustment
may be needed to keep bag from
rubbing tailgate and paint.
Instructions:
Step(1) Step (2)
Step (1) Open tire carrier as shown.
Step (2) Wrap the top Nylon straps
around the tire carriers A
frame as shown.
Do not tighten at this time
NOTE: zipper rain flap should
face the inside of tire carrier
as shown. This allows the
removal of gear with carrier
Step (3) Step (4)
swung open.
Step (3) Repeat step 2 for the lower
Nylon straps. Do not tighten
at this time.
Step (4) Align all straps so that bag
is even within A-frame.
Tighten straps at this time.
DO NOT OVER TIGHTEN.
Step (5) Check bag clearance to spare
Step (5) Step (6)
tire. Adjustment may be
needed.
Step (6) If tire touches bag loosen
spare tire adjuster nuts and
slide out until bag no longer
makes contact with tire.
retighten spare tire adjuster nuts.
Note: Bag can touch tire if
unable to completely adjust
away from bag.