Rugged Ridge 3-Inch Double Tube Front Bumper, Titanium, 76-06 Jeep CJ & Wrangler - Manual

Installation Instructions
Front Tubular Bumper For
1976-2006 CJ7 and Wranglers
Parts List: (1) Front Tube Bumper
DO NOT DISCARD ORIGINAL HARDWARE
Important Notice: To obtain the correct installation, We recommend that
you follow these instructions carefully. Please review the instructions before
proceeding to install front bumper. Please take care when installing this
product to protect the finish and your investment.
Installation Instructions
Step (1) Remove the front bumper from the vehicle. DO NOT DISCARD
ORIGINAL HARDWARE. It will be reused for the new bumper
installation.
Step (2) Position the new front bumper up to the frame and line up holes
to factory mounting locations. Using the stock bolts and supplied
flat washers secure bumper to vehicle. Be sure to use all hardware
supplied and tighten all bolts.