Rugged Ridge 3-Inch Stainless Steel Front Tube Bumper, 55-06 Jeep Models - Manual

TUBULAR FRONT BUMPER WITH HOOP, STAINLESS, 55-06, CJ & WRANGLER
11520.01
Step (1) Remove the front bumper from the vehicle.
DO NOT DISCARD ORIGINAL HARDWARE.
It will be reused for the new bumper installation.
Step (2) Position the new front bumper up to the frame
and line up the holes to factory mounting
locations. Using the stock bolts and supplied
flat washers secure bumper to vehicle. Be sure
to use all hardware supplied and tighten all bolts.