Rugged Ridge Dual Battery Tray, 07-11 Jeep Wrangler (JK) - Manual

Jeep
®
JK Wrangler Dual Battery Tray
Contents
1. Dual Battery Tray (1)
2. Fuse Box Bracket (1)
3. Battery Strap (1)
4. J-Bolt (2)
5. Nut (2)
6. Flat Washer (3)
7. Bolt (3)
8. Spacer (3)
Page 1 of 4
11214.53
1. Disconnect battery by removing the NEG (-) cable first and than
the POS (+) cable. Remove ground from the stud on the inner fender.
2. Remove the PVC hose from the filter box. Remove the air filter
cover by unclamping the cover and removing the hose clamp on the
throttle body. Remove the air filter and housing. The housing is held
in by three rubber grommets on the bottom of the box. A rocking
motion may be needed for removal of air box.