Rugged Ridge Cold Air Intake Kit, 2.5L, 97-02 Jeep Wrangler (TJ) - Manual

17750.02
TJ 97-02 Air Intake - 2.5L
Contents:
1. Intake Tube (1)
2. Heat Shield (1)
3. Weather Stripping
4. Air Filter (1)
5. Throttle Body Coupling (1)
6. Large Hose Clamps (3)
7. Breather Hose (1)
8. Small Hose Clamps (2)
9. M8 Mounting Bolt (1)
10. M8 Flat Washers (2)
11. M8 Nut (1)
12. Rubber Isolator Mount (1)
13. M6 Washers (2)
14. M6 Nuts (2)
15. Zip Tie (1)
1. Remove original Air Filter, Air Box, Intake Tube, and Breather Tube.
Page 1 of 3
2. Install Rubber Isolator Mount to the vehicle in the rear-most hole that was utilized by the stock air box.
Fasten to vehicle using M6 Flat Washer and M6 Nut from below.
Rubber Isolator