Rugged Ridge Cold Air Intake Kit, 3.6L, 12-14 Jeep Wrangler - Manual

Page 1 of 3
17750.07
2012 - UP JK Wrangler Cold Air Intake - 3.6L
Contents:
1. Intake Tube (1)
2. Heat Shield (1)
3. Weather Stripping (1)
4. Air Filter (1)
5. Throttle Body Coupling (1)
6. Large Hose Clamps (3)
7. Small Hose Clamps (2)
8. M6 Mounting Bolt (2)
9. Rubber covered clamps (2)
1. Remove original air filter, air box, intake tube, intake temperature sensor, and breather tube.
2. Remove mounting bushings from tray. Place aluminum spacers onto try. Remove top passenger
side radiator shroud bolt.
Remove Intake, and breather tube Disconnect air sensor Pull air box free from inner fender
9. M6 Flat Washers (4)
10. M6 Nut (2)
11. M6 Aluminum Spacer (2)
12. Rubber Isolator Mount (1)
13. M6 Washers (2)
14. M6 Nuts (2)
15. Grommet (1)
16. Heat Shield Rubber Trim (1)
Remove bushings Place spacers on top of tray Remove upper shroud bolt