Rugged Ridge Mirror Relocation Brackets, Black, 07-14 Jeep Wrangler (JK) User Manual

Rugged Ridge For the car

Advertising
background image

2007 JK Wrangler Mirror Relocation Kit

P/N: 11025.04 (Black) – 11026.04 (Stainless)

Applications: 2007-08 Wrangler 4dr and 2dr

PLEASE READ THESE INSTRUCTIONS prior to installing.
This kit requires you to remove your factory mirror from your 2007-2008 Wrangler front doors. In most
states it is required to maintain at least two rear facing mirrors at all time on any motor vehicle. With
your new Rugged Ridge mirror relocation kit the location of your factory mirror head is moved
forward, off the door, to the front A-pillar (windshield frame). Once relocated a special door filler plate
is supplied to cover the opening left on the factory half, or full doors. This plate will allow you remove
your doors at anytime for open air driving.
PLEASE NOTE: Due to the placement of the new mirror brackets, the passenger side mirror will be
partially blocked with full doors reinstalled. This is normal and is an unfortunate side effect of the
new mirror placement. With doors removed or the installation of factory half doors visibility will NOT
be blocked and function as intended.

This Mirror Relocation bracket
includes:

(1) Left side mirror
relocation bracket

(1) Right side mirror
relocation bracket

(2) Door filler Plates

1

Advertising