Rugged Ridge Hood Catch Set, Stainless Steel, 07-14 Jeep Wrangler - Manual

11116.06 (Stainless Steel)
Jeep
®
JK Stainless Steel Hood Catch
Contents:
Upper Catch (2)
Upper Catch Gasket (2)
Upper Catch Screw Plate (2)
Upper Catch Lock Nuts (4)
Lower Catch Assembly (2)
Lower Catch Gasket (2)
Lower Catch Lock nut (2)
*Note - Only one side pictured.
1. Pre-assemble the components as shown in Figure 1.
Figure 1a
2. Remove OE Hood Catches as shown in Figures 2a and 2b. Remove Rubber Bumper from
OE Hood Catch (Figure 2c).
Page 1 of 2
Figure 2a Figure 2b Figure 2c