Rugged Ridge CB Antenna Mount, 07-14 Jeep Wrangler - Manual

Rev. 6/11 Page 1 of 1 SB
CB Antenna Mount JK
11503.89
For Technical Assistance Contact:
OMIX-ADA Tech Support
Phone: 1-800-449-6649
Email: [email protected]
Web: www.Omix-Ada.com
PLEASE REVIEW ALL INSTRUCTIONS BEFORE YOU BEGIN.
Step 1. Remove the spare tire from your factory mount.
Step 2. Remove the (2) top right hand 13mm hex bolts from the spare tire mount.
Step 3. Install the CB Antenna Mount using the supplied hex bolts, lock washers,
flat washers. Torque bolts to 10 ft-lbs. Remount the spare tire after CB
Antenna installation is complete.
Note: CB Antenna mount has (2) mounting holes. Either hole may be used .
Contents: (1) CB Antenna Mount
(2) 8 x 40mm Hex Bolts
(2) 8mm Lock Washers
(2) 8mm Flat Washers