Rugged Ridge Hood Lock Kit, 07-14 Jeep Wrangler (JK) - Manual

(Part Number – 11252.05)
2007 Jeep® Wrangler hood Lock
Installation & Adjustment Instructions
Step (1)
Open hood of vehicle and prop up securely. Before proceeding, make sure the factory hood latch is
adjusted and working properly.
Step (2)
Locate the (6) plastic screws that attach the front grille to the upper body support (Fig. 1).
(Fig.1) (Fig.2)
unscrew the plastic screws using a Phillips head screw driver.
Note: the plastic screws can be pulled out by hand after they have been loosened. (Fig. 2)
If screws do not want to back out a small flat head screwdriver can be used to pry
the screws upward.
Step (3)
With the screws removed pop out the black retainer clip. (Fig. 3)
(Fig.3) (Fig.4)