Rugged Ridge Heated Door Mirror Kit, LED Signals, Black, 87-02 Jeep Wrangler - Manual

Heating element wiring instructions for YJ mirror
Part Number(11015.20)
1. Locate the black negative lead wire and the red positive lead wires that exit from the
bottom of the heated side mirror.
2. Connect the black wire to a good grounding point located near the doors on the tub of
the Jeep®. This will need to be done for both sides. The best grounding points will be
located on the tub.
The red wire will be connected to the 12V power lead coming from the supplied
switch. (See Fig.1)
Fig.1