Rugged Ridge Front Hawse Fairlead License Plate Mounting Bracket By Rugged Ridge - Manual

11238.07
Hawse Fairlead License Plate Holder
Page 1 of 1
Contents:
1. Hawse Fairlead License Plate Holder
w/ Snap Fittings Attached (1)
2. License Plate Mounting Bolts (4)
Attach Hawse Fairlead License Plate Holder to Hawse fairlead by aligning the 3 snap fittings with the opening in
the fairlead. Route winch line between the snap fittings and push the plate evenly until fittings engage. Use
supplied License Plate Mounting Bolts to attach license plate.
Contact Technical support if you need any assistance.
Telephone: 1-800-449-6649
Fax: 770-614-6069
[email protected]