Rugged Ridge Window Rain Deflectors, 08-10 Jeep Liberty (KK) User Manual
Rugged Ridge For the car
STEP 4 - Place the deflector in a desired location on the
door.
STEP 3 - Remove 2” of tape liner from each end of the
deflector.
STEP 1 - Clean the painted surface where the deflector
will be attached using Isopropyl Alcohol (Rubbing Alcohol).
STEP 2 - Hold and position deflector to determine
mounting position.
Page 1 of 2
Installation Instructions - Side Window Air/Rain Deflectors
Note
:
Application and product my vary from illustrations.
Caution:
Before driving, ensure that all deflectors are secured properly.
Please read all instructions before installation of Wind/Rain Deflectors
Preparations Before Installation
∙ Check and determine if Wind/Rain Deflectors are the correct fit for your vehicle.
∙ Wash and Clean all mounting surfaces of the vehicle using Isopropyl Alcohol (Rubbing
Alcohol).
∙ To ensure proper bond apply only when temperatures of mounting surfaces is between
65-110°F.
∙ Be sure all mounting surfaces are dry before installation.
Continue to Next Page