Rugged Ridge Roof Top Storage System, Small User Manual

Auto back pack, Installation instructions

Advertising
background image

Part# 12110.02 - 59200 (large) and 12110.01 – 159201 (small)

Page 1 of 3

Auto Back Pack

Installation Instructions

WARNING: Do not overload the Auto Back Pack. This product is designed to
carry a maximum of 100Lbs or not to exceed your factory roof rack or roof
capacity. Please check your owner’s manual to determine the appropriate
capacity of your roof/roof rack. Never exceed your factory roof racks/roof
capacity. Items such as computers, TV’s, jewelry and other valuables should
never be put into the Auto Back Pack. Though the Auto Back Pack is constructed
of a water resistant material, Rugged Ridge - Outland does not warrant that items
carried in the Auto Back Pack will remain dry. Water can seep through the seams
causing contents to become wet. Under no circumstances will Rugged Ridge -
Outland or any of its distributors be responsible for damage to any vehicle or any
item stored in the Auto Back Pack while using this product. Please use this
product responsibly.

Part numbers: 12110.02 – 59200 (large) 12110.01 – 159201 (small)


















Important Information

The Auto Back Pack rooftop storage system attaches quickly with straps to luggage rack

or rooftop with or with out rain gutter. The four Polypropylene straps and Delrin connectors
secure the Auto Back Pack to the rooftop. With the standard model capable of storing up to 13
cubic feet and the large model capable of storing up to 20 cubic feet, the Auto Back Pack allows
increased cargo space for long and short trips.



















Read all instructions thoroughly before beginning!

Advertising