Rugged Ridge Mirror Relocation Brackets, Stainless Steel, 03-06 Jeep TJ/LJ Wrangler User Manual

Rugged Ridge For the car

Advertising
background image

1997-06 TJ
Mirror Relocation Brackets
11025.03 - Black
11026.03 - Stainless Steel

Page 1

Step 1.

Remore the three bolts that

retain the factory door mirror. Remove the
factory mirror.

Step 2.

Remove the two side door

hinge bolts. The factory uses threadlock to
retain these bolts, so some effort may be
required.

Step 3.

Using the included hardare,

install the relocation bracket using the
existing factory door hinge bolt holes.
Install both bolts loosely. Note that the
relocation bracket points forward.

Step 4.

Tighten both bolts snugly.

Step 5.

The relocation bracket is now

installed.

Step 6.

Place the factory mirror onto

the relocation bracket, taking care to
align the mounting bolt holes. Using the
included hardware, insert the bolts through
the mirror and bracket mounting holes.

Step 7.

Place one washer on each bolt,

followed by one nut (included). Tighten the
nuts snugly, taking care not to over tighten.

Step 8.

Installation is now complete.

Repeat for the other side.

Rugged Ridge - Outland Automotive and OMIX - ADA (the company) warrants to the original purchaser of this product that should the product or any
part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 DAYS from the date of original purchase, such
defect(s) will be repaired or replaced or credited at the Company’s sole option.

To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. Dated bill of sale),
specification of defect(s) to the place of purchase or, with prior approval from the Company (Return Authorization Number is required), freight pre-paid
to the Company address listed below.

This warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration,

improper installation, mishandling, misuse, neglect, accident or by acts of nature. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY
EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.

This Warranty is in lieu of all express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERHCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN THE PERIOD OF
90 DAYS FROM DATE OF ORIGINAL PURCHASE.

IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability

other than expressed herein in connection with the sale of this product.

Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage, so the
above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

LIMITED 90 DAY WARRANTY

Applies to Rugged Ridge - Outland Automotive by Omix-Ada Inc. Products

Omix-Ada Inc.

460 Horizon Dr. Suite 400

Suwanee, Georgia 30024

Advertising