Rugged Ridge Bug Deflector, Matte Black, 07-14 Jeep Wrangler - Manual

Copyright © 2013 Omix-Ada ® , Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
Page 1/1
11348.02
Bug Deflector
OMIX-ADA ® TECHNICAL SUPPORT
PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: [email protected]
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
Contents:
• Bug Deflector
(1)
• Screw Plugs (2)
• Phillips Head Screws (2)
• Washers (2)
2. Remove red protective backing from double sided
tape. Install bug deflector. Secure with two washers and
two screws into previously plugged holes. Press firmly on
taped areas and hold for 60 seconds.
NOTE: Do not use power tools to install this product. Do
not overtighten.
1. Clean and open hood. Test fit bug deflector centrally
on hood. Note (2) holes in hood cooresponding with two
slots in bug deflector. Remove bug deflector. Insert plastic
screw plugs into holes previously noted.