AllerAir 5000 DH - Manual

The Unique Advantages of AllerAir MAC-B Carbon.
Actual Size
5000 series $399.98
HEPA
15 lbs. of carbon
2 Anti- microbial filters
pro-dense pre-filter
G0900R13_ALLER_Artists Nov. 04, 04
slow reveal. "The risks for artists are a lot more subtle
than they are for other workers," says Rickard."Artists
tend to absorb the chemicals they use in small
doses, which leads to chronic, low-level poisoning."
[…] "The biggest problem for artists is the air
pollution they create," says Rickard, who's been an
expert in such matters for nearly 20 years now.
"For many artists, the challenge is getting
fresh air to the nose."
Unfortunately, many artists don't start taking the
risks involved with their craft seriously until later in
life. That was the case for Jennifer Dickson, who
damaged her lungs by working with large-format
photo etchings in the '60s and '70s.
"I can remember standing over acid baths watching
nice orange clouds coming off," she recalls.
Dickson, a retired professor and celebrated
printmaker, says she nearly died from respiratory
problems in the early '70s. She considers it a miracle
that her son was born healthy despite exposure to
harsh chemicals during the pregnancy.
"I had no one to blame but myself for
my own stupidity and ignorance," she
said. "A lot of artists became ill because
they weren't working in a safe way. But
there's no excuse for it now."
Should fine art come with a warning label?
Artists exposed to toxic chemicals. Many now take the risk seriously
article on
TORONTO STAR
posted on Oct. 9, 2004
[…An] Ontario College of Art and Design
student had been a touch cavalier with a bottle of
nitric acid in the etching studio, and had spilled a
good amount of it over her legs and shoes.
[...]She was rinsed off, rushed to the hospital and
treated for third-degree burns. The student was
okay, but never returned to art school.
"I tell that story to every new printmaking
class," says (Professor Rudolf) Bikers. "It
gets them thinking about safety in the studio."
Though we tend to think of workplace safety as
something that applies to industrial environments
such as construction sites and factories, the artist
,too, faces an alarming number of occupational
hazards.
While most of the pitfalls aren't as cataclysmic as the
case of Bikkers and the disrobed pupil, a lifelong
exposure to the chemicals, heavy metals, fumes and
particulate associated with many forms of art-
making can spell serious health problems -
especially when safety precautions are ignored.
[…] Hobbyists are at risk too, as they are least likely to
take precautions when it comes to producing art
and could be affecting the health of their families.
Ted Rickard, OCAD's manager of health and safety,
says the hazards facing artists are insidious in their
Activated Carbon Filters Noxious Gases and Odors
The millions of pores in the activated carbon provide an enormous surface area for airborne
chemicals to bond with.
Adsorption is the process where certain chemicals are attracted to the activated carbon and
then bond to it.
Activated carbon is the material used in military gas masks.
The bigger the filter, the more chemicals it adsorbs and the longer
it keeps on working.
AllerAir MAC-B™ carbon filters have from 18 to 160 lbs.
Gases and chemicals
Activated Carbon
Pores
Activated Carbon absorbs gases
and chemicals (enlargement)
High Efficiency Filtration
All Artists
- Painters
- Sculptors
- Glass Blowers
- Potters
- Art Restorators
- Print Makers
Air Purifiers for
Artists
Consult our air
quality experts.
air
quality experts will
be happy to discuss
solutions to any air
contamination
problems.
Toll free:
1 888 852 8247