Rugged Ridge All Terrain Fender Flare Kit, 4-Door, 84-01 Jeep Cherokee (XJ) User Manual
Xj off-road flare kit
Rev. 5/12
Page 1 of 15
SB
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE YOU BEGIN.
11634.10
XJ Off-Road Flare kit
NOTICE: Body modification is required for the installation of these flares. Cutting of the body
panels is required.
Trimming of body moulding or modification of flares will be needed for a proper fit.
CAUTION: Body and eye protection must be worn during installation of the flares.
Note:
1. Verify fitment of flares to the vehicle. Some sanding or cutting may be necessary to
ensure proper fitment.
2. Modifications to exhaust system may be necessary. A minimum of four inches of clearance
between flares and exhaust system is required.
3. Bare metal will need to be treated and painted before installation of flares.
Note: Some procedures will be different depending on year and body trim. Please be sure to
follow the steps carefully that applies to your model year.