Rugged Ridge Ultimate Locking Console, Gray, 76-95 Jeep CJ & Wrangler User Manual
Rugged Ridge For the car
Included Components
Quantity
1. Console
(1)
2. Mounting Bracket
(1)
3. 14 X 1 ¾” Screw
(3)
4. 8 X ¾” Screw
(4)
Important Information - 13101.XX console used for reference only.
Installation steps are the same for 13102.XX
•
Please refer to Section 1 on pages 1 -3, for the Jeep
CJ-7 and Wrangler
ONLY.
•
Please refer to Section 2 on Page 4, for the 1976-83 Jeep
CJ-5 ONLY.
Section One – Installation Instructions
1. Position the Console in the desired position between the Driver/Passenger
seats (Figure 1).
2. Position the Mounting Bracket under the rear of the Console with the legs
of the Mounting Brackets level to the floor (Figure 2).
NOTE: The installation of the Mounting Bracket will not be required for the
76-83 CJ-5.
Figure 1 Figure
2
Required Tools for Installation
1. Electric Drill
2. 1/8” Drill Bit
3. 3/16” Drill Bit
4. Phillips Screw Driver
Rugged Ridge Locking console 13102.XX
Installation Instructions
1976-1995 CJ & Wrangler