Rugged Ridge Dash Multi-Mount System, 11-14 Jeep Wrangler User Manual
11+ jk accessory mount dash organizer, Components: required tools
Copyright © 2013 Omix-Ada
®
, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
11+ JK Accessory Mount Dash Organizer
3. Install Accessory Mount Base. Hooks on arms of
Accessory Mount Base will snap into upper dash-
board vents closest to windsheild.
4. Reinstall factory screw removed in Step 2.
5. Place custom Rubber Tray into dashboard stor-
age area.
1. Accessory Mount Base
(1)
2.
Rubber
Tray
(1)
3. Universal Ball Mount
(1)
4.
Cap
Piece (1)
1. Socket Driver
2. 7 mm Socket
1. Remove factory rubber tray from dashboard stor-
age area above center console.
2. Remove factory screw using a socket driver and
a 7 mm socket. Do not discard factory screw, it will
be reused in product installation.
Page 1/2
13551.11
Components:
Required Tools:
OMIX-ADA
®
TECHNICAL SUPPORT
PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: [email protected]
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
Read all instructions thoroughly before installation.
Rev 02/2014