Rugged Ridge Frame Brace Kit, 07-14 Jeep Wrangler - Manual (Page 3)

Page 3 of 3 Rev. 11/11 SB
For Technical Assistance Contact:
OMIX-ADA Tech Support
Phone: 1-800-449-6649
Email: [email protected]
Web: www.Omix-Ada.com
Copyright Omix-Ada 2011
18205.25
Step 7. Install the frame brace bar in the brackets using one 9/16” x 3”
hex bolt on the passenger side and one 9/16” x 3 1/2” on the
driver side with flat washers and a hex nut on each. Tighten the
jam nut on the frame brace bar.
Step 8. Torque the bolts to the following specifications:
-Frame Brace Bar End Bolts- 85 ft lbs.
-Steering Bear Box Bolts- 65 ft lbs.
-Track Bar Bolt- 125 ft lbs.
Note: The extra threads sticking out on the button head bolt may
have to be trimmed for clearance of the sway bar ends.