Rugged Ridge Hood Catch Mounted H3 Halogen Fog Light Kit, 07-14 Jeep Wrangler (JK) - Manual

Page 1 of 2
1. Remove the 13 mm retaining nut on the back side 2. Install the light mounting bracket with the mounting
of the hood catch. pointing towards the rear of the vehicle. Repeat
this for both sides.
Rev 01/10 SB
3. Install the light using a 9/16 in. wrench. 4. Install the on/off switch at a suitable location on the
dash.
15207.70
HOOD MOUNTED OFF ROAD LIGHT KIT, 4 IN BLACK, 100W JK 07-10
REQUIRED TOOLS.
1. 10mm Wrench
2. 9/16" Wrench
3. 3/8" Drive Ratchet
4. 13mm Deep Well Socket
5. 10" 3/8" Drive Extension
6. Wire Crimpers