Rugged Ridge Neoprene Front Seat Covers, Black, 07-10 Jeep Wrangler - Manual

P/N: 13214.01
13214.09
Installation instructions
13214.53
2007 Jeep® Wrangler JK - Neoprene Front Seat Covers
2-door and 4-door (front seats only)
Parts included: (1) Front driver's side seat cover - with head rest
(1) Front passenger's side seat cover - with head rest
NOTE: Please read instructions before installing
Instructions: Step(1) Step(2)
Step (1) Slide, and tilt back of seat forward
Step (2) Remove Head rest
Step (3) place upper cover over top of
seat. Pull all the way down as
shown.
Step (4) The neoprene cover has two
holes located on top. Push
fabric down and under plastic
head rest lock tabs mounted
Step (3) Step (4)
into top of seat.
Step (5) Fish front flap through gap
between the upper and lower
seat sections. This is a tight
fit. Folding seat forward may
help.
Step (6) Pull rear flap tight and attach
to the front flap using attached
Velcro. Adjust cover for proper fit.
Side ABS air bag cover should
Step (5) Step (6A)
be slipped under cover as shown.
Install head rest cover and
attach Velcro to secure.
Step (6B)