Rugged Ridge Neoprene Rear Seat Cover, Black, 07-14 Jeep Wrangler Unlimited (JK) User Manual
Page 2
Step (6)
Step (7)
Step (7) With front of cover pulled
over seat run nylon straps
and clips under seat.
Secure to back clips and
pull tight.
NOTE: DO NOT OVER TIGHTEN
Damage to seat cover may
result.
Step (8) Slide side clips between
seats and secure to underside
of seat.
Step (8)
Step (10A)
Step (9) Repeat steps 6 - 8 for the right
side lower seat.
Step (10) Unzip large right side upper
cover. Slip around seat as
Shown in steps 10A and 10B.
Seat belt must be slid through
opening before zipping.
Step (11) Push lower Velcro flaps
between the upper and lower
Step (10B)
Step (11)
seat and secure together.
Step (12) Pull upper Seat sections
through head rest slots.
Note: Tilting head rest
back will help with install.
Secure front & rear Velcro flaps.
Note: on 2008 and newer
models the seat release is
deleted from the top. Flip the
supplied flap over the top of the
Step (12A)
Step (12B)
seat and stuff under cover (12B)
Step (13) Slide covers over head rest as
shown.
Step (12)