Rugged Ridge Neoprene Rear Seat Cover, 07-14 Jeep Wrangler Unlimited (JK) - Manual

P/N: 13264.01
Installation instructions 13264.04
2007-08 Jeep® Wrangler JK - Neoprene Rear Seat Covers 13264.09
4-Door Rear Seats 13264.53
Parts included: (1) Rear (top & bottom) Left Side Seat Cover - Small
(1) Rear (top & bottom) Right Seat Cover - Large
(2) Head Rest Covers
NOTE: Please read instructions before installing
Instructions:
Step(1) Step (2)
Step (1) Release and slightly fold
rear seat forward -Driver Side
For 2008 and newer JK's
pull nylon seat release located
on the bottom corner of the
seat.
Step (2) Slip upper seat cover over
seat. Note location of head
rest slots with Velcro.
Step (3) Slip lower Velcro strip Step (3) Step (4)
between the upper and
lower portions of the seat.
and secure.
Step (4) Secure front and rear Velcro
As shown. Adjust as needed.
Step (5) Pull upper Seat sections
through head rest slots.
Note: Tilting head rest
back will help with install.
Secure front & rear Velcro flaps.
Step (5A) Step (5B)
Note: on 2008 and newer
models the seat release is
deleted from the top. Flip the
supplied flap over the top of the
seat and stuff under cover (5B)
Step (6) Slip smaller lower seat cover
into bottom of seat. Push
rear of cover (with clips)
between top and bottom of
seat. Folding seat forward
will ease installation.