Rugged Ridge Neoprene Rear Seat Cover, Black & Tan, 07-14 Jeep Wrangler (JK) - Manual

P/N: 13265.01
Installation instructions 13265.04
2007-08 Jeep® Wrangler JK - Neoprene Rear Seat Covers 13265.09
2-Door Rear Seats 13265.53
Parts included: (1) Rear top cover
(1) Rear bottom cover
(2) Head Rest Covers
NOTE: Please read instructions before installing
Instructions:
Step(1)
Step (1) Remove rear headrest from
seat. The headrest can be
removed by pressing the
two buttons located on the top
of the seat.
Step (2) Slip upper seat cover over
rear seat. Note location
of headrest mounting holes.
Slip lower Velcro strip
between the upper and
lower portions of the seat
and secure. Connect zipper
and close.
Step (2)
Step (3) Push seat cover over headrest
mounting plates. Secure under
plastic caps as shown.
Step (4) Adjust upper seat cover as
needed for proper fitment.
Step (5) Slip lower cover over seat
bottom and slide back clips
and straps through the gap
between the top section and
the lower seat section.
Fold and touble the seat so
that front to rear straps can
Step (3)
be secured.
Step (6) With seat folded forward
loosen staps and attach front
strap to back clip. Repeat for all
three locations.