Rugged Ridge XHD Soft Top, Khaki, Tinted Windows, 97-06 Jeep Wrangler (TJ) - Manual (Page 7)

Step (17): Use the tap sewn into the cover to work
the last corner of the frame into the corner
of the frame into the corner of the door
cover, again between the hook and the
flaps. Make sure that the top edge of the
door cover is straight along the top of the
door frame. Work around the door fastening
the hook and loop strips tightly around the
door frame. Once the door cover is on the
frame, the tab in the top rear corner of the
cover may be cut off with a pair of scissors
if desired.
Step (18): Reinstall the upper doors. Insert the pins
into the grommets in the lower door.
Folding the Top Down.
Step (1) : Remove the quarter panels and rear window
curtain and store them carefully.
Step (2) : Release the front of the top from the
windshield. Raise the front of the deck and
collapse the rear bows, tucking the two
plastic strips above the door opening and
the stay pad on the rear bow inside of the
bows. Wrap the fabric around the bows,
then tuck the rear legs of the top under the
bows.
Pg.7