Rugged Ridge Header Roll Bar Top, Black Denim, 97-06 Jeep Wrangler (TJ) User Manual
Roll bar top
Roll Bar Top
1997-Current Wrangler
Rugged Ridge = 13581.15, 13581.37, 13581.35,
13581.36, 13581.37
Outland = 93615, 93617, 93635, 93636
Included Components:
1-Roll Bar Top
2-J-Clips
If your Wrangler does not have a soft top Windshield Channel, your installation requires the purchase of
an aftermarket Windshield Channel (Rugged Ridge p/n: 13308.04)
INSTALLATION INSTRUCTIONS:
Before you begin, the temperature of the Roll Bar Top should be above 70 degrees Fahrenheit. We
suggest laying the Roll Bar Top in the sunlight for 1 hour before installation.
Figure 1
1. Locate the rubber blade on front edge (Figure 1).
2. Place the Brief on top of Jeep. Insert rubber blade into Windshield Channel, working from one side
of vehicle to the other (Figures 2 & 3).
Figure 2
Figure 3
Part : 13581XX / 936XX (REV 2 – 7.27.08)
Page 1 of 4