Rugged Ridge Soft Top, Door Skins, Black Denim, Clear Windows, 88-95 Jeep Wrangler - Manual (Page 2)

Removing the Old Top
Tools needed:
(1) Shoe Horn
(2) Safety Glasses
Safety glasses should be worn
(3) Razor Knife at all times while installing this
product.
Step (1) : Remove the quarter windows and rear
window. Remove the metal tailgate bar
from the bottom of the rear window and
set to the side. It will be reused.
Step (2) : Unsnap the center and rear cloth tabs from
the frame
Step (3) : Pull down on spreader bars and push rear
support bow forward.
Step (4) : Release the rear corners of the top. Pull
gently down and then out to release the
plastic strip from the retainer on the
vehicle.
Step (5) : Unsnap the old top from above doors, remove
front plastic strip from windshield channel and
remove old top.
Pg.2