Rugged Ridge Eclipse Sun Shade, Black, 07-14 Jeep Wrangler (JK) User Manual

Jeep wrangler

Advertising
background image

Copyright © 2013 Omix-Ada

®

, Inc.

460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]

Page 1/2

13579.04

OMIX-ADA

®

TECHNICAL SUPPORT

PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: [email protected]

FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com

Contents:
• Eclipse Sun Shade
• Mesh Storage Bag

NOTE: The Eclipse Sun Shade has
been designed to work for both
2dr @ 4dr models. Design allows
shade to remain in place with soft
top closed or Freedom panels in
place.

JEEP WRANGLER

®

ECLIPSE SUN SHADE (Front: 2007-2013 2dr / 4dr JK)

1. Before installing flip soft top to
Sunrider feature or lower top
to full down position. Freedom
panels will need to be removed
for installation on hard top
vehicles. Slide front side Velcro
straps through windshield
footman loops and secure (fig.1).
Loop rear Bungee straps over
factory sports bar and back to
strap button (fig.2)

Figure 1

Figure 2

2. Slide center Velcro strap through
center windshield footman loop.
Note: Two straps have been
provided for all years (07-09)
(10 - UP). The strap not used can
be cut away (fig.3). Connect
Bungee hooks to footman loops.
Hooks go to the inside of footman
loops (fig.4)

Figure 3

Figure 4

Advertising