Rugged Ridge Soft Top, Door Skins, Charcoal, Clear Window, 88-95 Jeep Wrangler (YJ) - Manual (Page 5)

Step (11): Fasten snaps on top, above doors, to stubs
on vehicle. Studs will slide to match location
of snaps on top.
Step (12): Unfasten the plastic retainer at the bottom
of the fabric door and remove it from the
vehicle. User a razor knife to cut the stitches
on the old door covers and remove them from
the door frames.
Step (13): Separate the hook and loop fasteners on the
door covers and slide the new cover onto the
frame, starting at the top. Work from corner,
to corner wrapping the fabric around the
frame and fastening the hook to the loop as
you work around the door.
Note: a shoe horn may help with the stretching
of the door skins over the upper door frames.
Step (14): Reinstall the upper doors. Insert the pins into
the grommets in the lower doors.
Step (15): Fasten the snap at the front of the upper door.
Slip the plastic strip on the bottom of the soft
door into the retainer on the steel door.
Care and Maintenance of Your New Top.
Your top is made of the finest materials available. To keep it looking new and for the maximum
possible ware, it will need periodic cleaning and maintenance.
Washing:
The fabric should be washed often using soap, warm water and a soft bristle brush. Rinse with
clear water to remove all traces of soap.
Pg.5