Rugged Ridge Windshield Channel, Drill, 97-02 Jeep Wrangler (TJ) - Manual

Contents:
(1) Left Windshield Channel
(1) Right Windshield Channel
(10) #8 x 1/2" Self Tapping Screws
Phillips Head
1. Please read instructions fully prior to installing this header. It is important that the header be installed
correctly as to not impede the safe operation of the vehicle.
2. Locate the left and right windshield channels
supplied in this kit. Place them with the open
channel up. NOTE that the outside corners of
channels are rounded to accomodate the side
sports bars.
3. Using this as a guide place the channels along
the inside-top of the windshield. The retangular
ends of each channel MUST butt up to each
other to form an opening around the center
footman loop.
4. When properly positioned the channels will rest
inside of sports bars and also clear soft top
header latches.
5. Mark the location of the five mounting holes on
each channel. Use the center punch to make a
slight indention. Do Not Use Excessive Force.
6. Drill a 1/8" hole for each marked location. Install
channels using supplied phillips head screws.
Page 1
Rugged Ridge - Outland Automotive and OMIX - ADA (the company) warrants to the original purchaser of this product that should the product or any
part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 DAYS from the date of original purchase, such
defect(s) will be repaired or replaced or credited at the Company's sole option.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. Dated bill of sale),
specification of defect(s) to the place of purchase or, with prior approval from the Company (Return Authorization Number is required), freight pre-paid
to the Company address listed below.
This warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration,
improper installation, mishandling, misuse, neglect, accident or by acts of nature. THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY
EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERHCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN THE PERIOD OF
90 DAYS FROM DATE OF ORIGINAL PURCHASE.
IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability
other than expressed herein in connection with the sale of this product.
Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage, so the
above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.
LIMITED 90 DAY WARRANTY
Rugged Ridge - Outland Automotive by Omix-Ada Inc.
Omix-Ada Inc.
460 Horizon Dr. Suite 400
Suwanee, Georgia 30024
NOTE: This header is a drill and install application.
The Following tools will be needed for
installation.
(1) 1/8" drill bit
(1) Electric Drill
(1) Center Punch
(1) Phillips Head Screwdriver
13308.02 TJ Wrangler Windshield Channel (Drill Type)
1997 - 2002 Applications
Windshield Channel (1997 - 2002) Jeep Wrangler (TJ) - Drilling Required
Butt Channels together.
Left Side Channel
Right Side Channel
Center Footman Loop