Rugged Ridge Header Summer Brief, Khaki Diamond, 97-06 Jeep Wrangler User Manual
Island topper roll bar top
Part 935XX – 13581.XX
Page 1 of 3
3/01
Part number 936XX or 13581.XX
INSTALLATION INSTRUCTIONS:
Before you begin, the temperature of the Island Topper (Roll Bar Top) should be above 70 degrees
Fahrenheit. We suggest laying the Island Topper in the sunlight for 1 hour before installation.
1. Locate the front edge of the Island Topper (Roll Bar Top)
As seen in (Fig 1).
2. Place the Windshield Channel inside the top of the
windshield. Screw in the Windshield Channel, working
from one end to the other (Figure 2).
Island Topper
Roll Bar Top
1997-Current Wrangler
Included Components:
1-Island Topper
2-J-Clips
Figure 1
Figure 2
If your Wrangler does not have a soft top Windshield Channel, your installation requires the purchase of
an aftermarket Windshield Channel (Outland – Rugged Ridge Part # 90104 – 13308.04)